Equipment

Showing 1–40 of 237 results

  • Used 2001 Powerscreen Chieftain 1400 Wheeled Screener

    Used 2001 Powerscreen Chieftain 1400 Wheeled Screener
    Unit is wheeled, complete with Vibrating Grid option
    **Rebuilt by Aggregate Equipment**
    7500 hours
    Available on request
    FOB Truro NS

  • Used 2010 Roadtec SB2500D Shuttle Buggy

    Used 2011 Roadtec SB2500D Shuttle Buggy – Material Transfer Vehicle
    Unit has 8515 hours
    Available on request
    As Is-Where Is (Buggy was completely gone over and fully serviced in winter 2019-2020)
    FOB Truro NS

    ENGINE:
    CAT® C9-300 HP, Tier llI, 6-cylinder diesel engine, 300 HP (224 kw) @ 2,200 rpm. Engine instrumentation includes tach/hour meter, oil pressure, voltage and emergency shutdown system. Easy access to oil cooler/radiator.
    OPERATOR’S STATION:
    Operator positions on both sides. Control panel pivots for use from either station allowing for same-lane or adjacent-lane operation from either side. One-piece hydraulically-raisable hood allows easy access to engine, pumps and motors. Inside turning radius 26’6″ (8.1 m).
    GROUND DRIVE:
    All hydrostatic for continuously variable speed control with two speed ranges. Electric-over-hydraulic shift between working and transport ranges. Maximum speed (working range) 3.0 mph (4.8 kph). Maximum speed (travel range) 9 mph (14.5 kph).
    TIRES:
    Large, high-flotation – 21:00 x 25″ (53.3 m x 635 mm).
    ELECTRICAL SYSTEM:
    Standard system includes heavy-duty alternator, battery, and circuit breaker protection of all systems.

    FUME EXTRACTION SYSTEM:
    Two blowers. Fold-down 10″ (254 mm) exhaust pipes.
    SLAT CONVEYORS TRUCK UNLOADING (C-1):
    High-capacity truck unloading system with low deck height, 9’2″ (2.8 m) truck opening and 22″ (559 mm) o.d. x 8″ (203 mm) deep, 27% chrome-iron cast, segmented converging auger for quick material flow. Conveyor has weld-on flights 5/8″ (16 mm) thick, 5.5″ (140 mm) wide x 57″ (1,448 mm) long. Ni-Hard liner plates are removable. Power dump front hopper has a vibrator on the bottom that helps keep material moving. Adjustable push roller is standard. Conveyor capacity
    is rated at 1,000 TPH (907 MTPH).
    SURGE BIN (C-2):
    Unloads the surge bin with a multi-pitch 22″ (559 mm) o.d. x 8″ (203 mm) deep, 27% chrome-iron cast, segmented anti-segregation auger in the hopper.  Conveyor system has weld-on flights 5/8″ (16 mm) thick, 7″ (178 mm) wide x dual 16″ (406 mm) long. Liner plates are Ni-Hard and removable. Conveyor capacity is 600 TPH (544 MTPH).
    PAVER LOADING (C-3):
    Conveyor swings 55 degrees to either side of center. Maximum conveyor discharge height is 12′ 6″ (3.8 m) from ground level. Conveyor flights welded to the chain are 1/2″ (12.7 mm) thick, 3″ (76.2 mm) wide and 30″ (762 mm) long. Conveyor has bolted 1/2″ (12.7 mm) 500 Brinell replaceable floor plates. C-2 and C-3 conveyors have on/off controls that are interlocked. Conveyor capacity is 600 TPH (544 MTPH).

    CAPACITIES:
    Fuel tank…………………………………….140 gal (529 L)
    Hopper……………………………………25 tons (22.7 MT)
    material………………..120 lbs/cu ft (1,922 kg/cu m)

  • Gomaco C-450 Finisher

    Pin-connected sections provide fast setup time and the versatility to fit exact job requirements. The C-450 frame widths range from 12 feet (3.66 m) to 104 feet (31.7 m), with transitional framework attached.

    Bridge Deck Finishing
    GOMACO has the proven bridge deck finishers. All-welded steel construction provides the sturdiest, yet most lightweight finishers on the market.

    Strictest Tolerances
    GOMACO finishers assure you less than one-eighth inch (3 mm) tolerance in 12 feet (3.66 m) while finishing high-slump or low-slump concrete.

    Crown Adjustment
    GOMACO offers optional hydraulic power transition adjusters (PTAs) for on-the-go crown elevation changes made from the operator’s console. PTAs may be installed at pinconnected points.

  • Sandvik Ranger DX900i Drill Rig

    Key Specifications
    Recommended hole diameter 89 – 140 mm / 3 – 5.5″
    Drill rod / tube diameter 51 and 60 mm / 2 and 2 ⅜”
    Hydraulic rock drill RD927L / 27 kW
    Engine Volvo TAD872VE 210 kW (286 hp) / 1 800 rpm
    Flushing air capacity 9.5 m³/min
    Operator cabin iCab
    Certificate ROPS and FOPS
    Transport Length 12.4 m / 40.7 ft
    Transport Width 2.45 m / 8 ft
    Transport Height 3.3 m / 10.8 ft
    Weight 19,600 kg / 43,210 lb
  • Sandvik Ranger DX800 Drill rig

    Key Specifications
    Recommended hole diameter 76 – 127 mm / 3″ – 5″
    Drill rod / tube diameter 45 or 51 mm / 1 ¾” and 2″
    Hydraulic rock drill HL820T, 21 kW / 28 hp

    HF820T, 23 kW / 31 hp as option

    Engine Caterpillar C7.1, 168 kW (225 hp) / 1 800 rpm (Tier3 / Tier4F)
    Flushing air capacity 8.1 m³/min, up to 10 bar
    Operator cabin Ergo cool
    Certificate ROPS and FOPS
    Transport Length 7.2 m / 10.7 m (24 / 33 ft)
    Transport Width 2.45 m (8 ft)
    Transport Height 3.6 m / 3.2 m (12 / 11 ft)
    Weight 15 200 kg / 33 510 lbs
  • Sandvik Ranger DX700 Drill rig

    Key Specifications
    Recommended hole diameter 76 – 115 mm / 3″ – 4½”
    Drill rod / tube diameter 45 or 51 mm / 1 ¾” and 2″
    Hydraulic rock drill HL710, 19.5 kW (26.5 hp)
    Engine Caterpillar C7.1, 168 kW (225 hp) / 1 800 rpm (Tier3 / Tier4F)
    Flushing air capacity 8.1 m³/min, up to 10 bar
    Operator cabin Ergo cool
    Certificate ROPS and FOPS
    Transport Length 7.2 / 10.7 m (24 / 33 ft)
    Transport Width 2,5 m (8 ft)
    Transport Height 3.6 / 3.2 m (12 / 11 ft)
    Weight 15 200 kg / 33 510 lbs
  • Sandvik Ranger DX600 Drill rig

    Key Specifications
    Recommended hole diameter 64 – 102 mm / 2½” – 4″
    Drill rod / tube diameter 38, 45 or 51 mm /1½”, 1¾” and 2″
    Hydraulic rock drill HL650 17.5 kW (23.5 hp)
    Engine Caterpillar C7.1, 168 kW (225 hp) / 1 800 rpm (Tier3 / Tier4F)
    Flushing air capacity 6.2 m³/min, up to 10 bar
    Operator cabin Ergo cool
    Certificate ROPS and FOPS
    Transport Length 7.2 / 10.7 m (24 / 33 ft)
    Transport Width 2.45 m (8 ft)
    Transport Height 3.6  / 3.2 m (12 / 11 ft)
    Weight 15 200 kg / 33 510 lbs
  • Sandvik Ranger DX500 Drill rig

    Key Specifications
    Recommended hole diameter 51 – 89 mm / 2 ” – 3½”
    Drill rod / tube diameter 32, 38 or 45 mm / 1¼”, 1½”, and 1¾”
    Hydraulic rock drill HL510, 15.5 kW (21 hp)
    Engine Caterpillar C7.1, 168 kW (225 hp) / 1 800 rpm (Tier 3 / Tier4F)
    Flushing air capacity 6.2 m³/min, up to 10 bar
    Operator cabin Ergo cool
    Certificate ROPS and FOPS
    Transport Length 7.2 / 10.7 m (24 / 33 ft)
    Transport Width 2.5 m (8 ft)
    Transport Height 3.6 / 3.2 m (12 / 11 ft)
    Weight 15 000 kg / 33 069 lbs
  • Sandvik Pantera DP1500i Drill rig

    Key Specifications
    Recommended hole diameter 102 – 152 mm / 4″-6″
    Drill rod / tube diameter 51, 60, 87 mm / 2″, 2 3/8″, 3 ½”
    Hydraulic rock drill HL1560T, 33 kW (44 hp)

    RD1635CF, 35 kW (48 hp) as option

    Engine Caterpillar C11,261 kW (350 hp) / 1 800 rpm (Tier3)

    Caterpillar C13, 287 kW (385 hp) / 1 800 rpm (Tier4F)

    Flushing air capacity 14 m3/min, up to 10 bar (depends on rock tools)
    Operator cabin Ergo cool
    Certificate ROPS and FOPS
    Transport Length 11.5 m / 37.7 ft
    Transport Width 2.5 m / 8.2 ft
    Transport Height 3.2 m / 10.5 ft
    Weight 23 000 kg / 50 710 lbs
  • Sandvik Pantera DP1100i Drill rig

    Key Specifications
    Recommended hole diameter 89 – 140 mm / 3 ½”-5 ½”
    Drill rod / tube diameter 51, 60 mm / 2″, 2 3/8″
    Hydraulic rock drill HL1060T, 25 kW (34 hp)
    Engine Caterpillar C9, 224 kW (300 hp) / 1 800 rpm (Tier3)

    Caterpillar C9.3, 224 kW (300 hp) / 1 800 rpm (Tier4F)

    Flushing air capacity 11 m3/min, up to 10 bar (depends on rock tools)
    Operator cabin Ergo cool
    Certificate ROPS and FOPS
    Transport Length 11.5 m / 37.7 ft
    Transport Width 2.5 m / 8.2 ft
    Transport Height 3.2 m / 10.5 ft
    Weight 22 900 kg / 50 490 lbs
  • Sandvik Tiger DG810 Drill rig

    Key Specifications
    Recommended hole diameter 64 – 127 mm / 2 ½” – 5″
    Drill rod / tube diameter 38, 45 or 51 mm /1 ½”, 1 ¾” and 2″
    Hydraulic rock drill HL810T, 21 kW (28 hp)
    Engine type Cummins 6CTAA8.3-C240
    Engine output power 179 kW (240 hp) / 2 200 rpm
    Flushing air capacity 9.6 m³/min, up to 10 bar
    Operator cabin Ergo cool
    Certificate ROPS and FOPS
    Transport Length 8.4 m / 27.6 ft
    Transport Width 2.45 m / 8.0 ft
    Transport Height 2.96 m / 9.7 ft
    Weight 14 700 kg / 32 407 lbs
  • Sandvik Tiger DG710 Drill rig

    Key Specifications
    Recommended hole diameter 64 – 115 mm / 2 ½” – 4 ½”
    Drill rod / tube diameter 38, 45 or 51 mm / 1 ½” , 1 ¾” and 2″ rods
    Hydraulic rock drill HL710, 19.5 kW (26 hp)
    Engine type Cummins 6CTAA8.3-C240
    Engine output power 179 kW (240 hp) / 2 200 rpm
    Flushing air capacity 8.1 m/min, up to 10 bar
    Operator cabin Ergo cool
    Certificate ROPS and FOPS
    Transport Length 8.4 m / 27.6 ft
    Transport Width 2.45 m / 8.0 ft
    Transport Height 2.96 m / 9.7 ft
    Weight 14 700 kg / 32 407 lbs
  • Sandvik Dino DC410R/Ri Drill rig

    Key Specifications
    Recommended hole diameter 51 – 76  mm / 2″ – 3″
    Drill rod / tube diameter 32, 35, 39 mm
    Hydraulic rock drill RD414, 14 kW (19 hp)
    Engine Volvo TAD570VE, 105 kW (141 hp) (Tier3)

    Volvo TAD570VE, 105 kW (141 hp) (Tier4F)

    Flushing air capacity 3.5 m³/min, up to 8 bar
    Transport Length 6.6 m / 21.7 ft
    Transport Width 2.35 m / 7.7 ft
    Transport Height 2.8 m / 9.2 ft
    Weight abt. 10 000 kg / 22 046 lbs
  • Sandvik Commando DC130Ri Drill rig

    Key Specifications
    Recommended hole diameter 22 – 45 mm / 7/8″ – 1 3/4″
    Drill rod / tube diameter 19, 22 or 25 mm / 3/4″, 7/8″ or 1″
    Hydraulic rock drill RD106, 5.5 kW / 7.4 hp
    Engine type Caterpillar C2.2 Tier 3
    Engine output power 36.3 kW / 2 800 rpm
    Flushing air capacity 1.2 m³/min, up to 8 bar
    Transport Length 5.14 m / 16.1 ft
    Transport Width 1.85 m / 6.1 ft
    Transport Height 2.54 m / 8.4 ft
    Weight 3 250 kg / 7 165 lbs
  • Sandvik Commando DC125R Drill rig

    Key Specifications
    Recommended hole diameter 22 – 45 mm / 7/8″ – 1 3/4″
    Drill rod / tube diameter 19, 22 or 25 mm / 3/4″, 7/8″ or 1″
    Hydraulic rock drill HEX 1, 5.5 kW / 7.4 hp
    Engine type Caterpillar C2
    Engine output power 37 kW / 2 800 rpm
    Flushing air capacity 1.2 m³/min, up to 8 bar
    Transport Length 4.7 m / 15.4 ft
    Transport Width 1.85 m / 6.1 ft
    Transport Height 2.45 m / 8.0 ft
    Weight 3 150 kg / 6 944 lbs
  • Sandvik DC120/DC121R/DC122R Drill rig

    Key Specifications
    Recommended hole diameter 22 – 45 mm / 7/8″ – 1 3/4″
    Drill rod / tube diameter 19, 22 or 25 mm / 3/4″, 7/8″ or 1″
    Hydraulic rock drill HEX 1, 5.5 kW / 7.4 hp
    Engine type Caterpillar C2
    Engine output power 37 kW (50 hp) / 2 800 rpm
    Flushing air capacity 1.2 m³/min, up to 8 bar
    Transport Length 4.5 m / 15.1 ft
    Transport Width 1.8 m / 5.91 ft
    Transport Height 2.2 m / 7.22 ft
    Weight 2 710 kg / 5 974 lbs
  • Used 1997 Elrus 6202 Feeder Screener

    Used 1997 Elrus 6202 Feeder Screener
    Unit is electric
    Available on request
    As Is-Where Is
    FOB Truro NS

    Features:
    Chassis
    – 21″ WF drop centre main frame
    – Tandem axle walking beam suspension
    – Eight 11R x 22.5 tires and bud wheels
    Screen Box
    – 6×20 S deck screen 332 series
    – 2×30 hp motors
    – 18″ drive sheave
    – 10 degree incline
    – walkways and ladders both sides
    42″ Overhead Conveyor
    – 20 hp motor
    48″ Front Delivery Conveyor
    – fixed height with 7′ discharge
    – 20 hp motor
    (2) 30″ Cross Conveyors
    – 10 hp motors

    Notes:
    – All electrical 575 v.
    – Control panel shown in pics is not in working order.
    – Current specifications may differ from what is listed above (list based on factory build sheet).

  • Sandvik QE141 Mobile scalper

    Key Specifications
    Hopper 12' x 8' / 3.7 x 2.4 m
    Engine C4.4 74.5kW / 100hp
    Transport Length 8.78m / 28' 10″
    Transport Width 2.70m / 8' 10″
    Transport Height 3.10m / 10' 2″
    Weight 20,000 kg / 44,092 lbs
  • Superior Aggredry Dewatering Washer

    Unfortunately, incorporating processes like washing and dewatering into your job sites can create some common inconveniences. Processing wet material means you often need additional time for it to dry. That extra time means delaying the reclamation of the stockpile. Also, extra real estate is needed for the drying inventory. The Aggredry Washer solves the problem by both washing and drying the material, producing instantly salable material with a moisture content as low as 8%.

  • Superior Spirit™ Sand Plant

    Providing a solution for sand production and fines recovery, the patent-pending Spirit™ Sand Plant includes a cyclone and dewatering screen to classify and produce salable sand product that meets customer specs. The life of a pit or quarry can be drastically lengthened by adding classifying and washing equipment to your application.

    The Spirit Sand Plant helps operators remove heavy clay from valuable sands, transforming useless material into product that is ready to go to market. The unit’s wetted surfaces are lined with cast polyurethane, eliminating seams and the risk of loose liners to provide the best wear properties available.

    The Spirit Sand Plant’s offset feed design eliminates turbulence by providing efficient slurry flow. This improved efficiency enables more precise classification and reduces component wear. Maintenance is made easier by providing better access to feed components. The design allows operators to avoid removing the vortex finder or discharge piping.

    Our Dewatering Screen helps you achieve moisture content in your product as low as 8%. The deep bed design removes more moisture more effectively than competitor models, giving you the highest possible percentage of salable product. The urethane sidewalls of the Dewatering Screen are lined with screen openings, creating a larger surface area for drainage. Screen attributes include a rigid ½ inch A36 steel welded frame, steel compression springs, recycle water line, and dual electric vibrators.

  • Sandvik QE241 Mobile scalper

    Key Specifications
    Hopper 11' x 4' / 3.35 x 1.24 m
    Engine C4.4 74.5kW / 100hp
    C3.4 55kW / 74hp
    Transport Length 9.98m / 32' 9″
    Transport Width 2.50m / 8' 2″
    Transport Height 3.10m / 10' 2″
    Weight 17,500 kg / 38,580 lbs
  • Sandvik QE342 Mobile scalper

    Key Specifications
    Screen Box 16' x 5' / 4.7 x 1.45 m
    Engine C4.4 74.5 kW / 100 hp
    Transport Length 14.84 m / 48' 8″
    Transport Width 3.00 m / 9' 10″
    Transport Height 3.40 m / 11' 2″
    Weight 29,770 kg / 65,631 lbs
  • Sandvik QE441 Mobile scalper

    Key Specifications
    Screen Box 18' x 6' / 5.5 x 1.75m
    Engine C4.4 96kW / 129hp
    Transport Length 16.33m / 53' 7″
    Transport Width 3.20m / 10' 6″
    Transport Height 3.50m / 11' 6″
    Weight 37,070 kg / 81,725 lbs
  • Sandvik QJ241 Mobile jaw crusher

    Key Specifications
    Equipment Single toggle C10 jaw crusher
    Feed Opening 1000 x 650 mm / 40″ x 26″
    Optimum Feed Size 520 mm / 21″
    Engine C7.1 Acert 168 kW / 225 hp
    Transport Length 13.90 m / 45' 7 ⅜”
    Transport Width 2.64 m / 8' 7 ⅞”
    Transport Height 3.22 m / 10' 6 ⅝”
    Weight 32,568 kg / 71,800 lbs
  • Gomaco GT-3600 Slipform Paver

    Specifications

    • DIMENSIONS (Shipping)
      • Overall length: 22.2 ft. (6.8 m) with conveyor. 17.4 ft. (5.3 m) without conveyor.
      • Overall height: 8.1 ft. (2.5 m) with trimmerhead.
      • Overall width: 8.5 ft. (2.6 m) with trimmerhead. 8.3 ft. (2.5 m) without trimmerhead.
    • WEIGHT (Approximate)
      • 25,720 lbs. (11,666 kg). Weight can vary depending on size of mold and options.
  • Gomaco GT-3600 Xtreme Slipform Paver

    Specifications

    • DIMENSIONS (Shipping)
      • Overall length: 22.2 ft. (6.8 m) with conveyor. 17.4 ft. (5.3 m) without conveyor.
      • Overall height: 8.1 ft. (2.5 m) with trimmerhead.
      • Overall width: 8.5 ft. (2.6 m) with trimmerhead. 8.3 ft. (2.5 m) without trimmerhead.
    • WEIGHT (Approximate)
      • 25,720 lbs. (11,666 kg). Weight can vary depending on size of mold and options.
  • Allied Hammer – RAMMER Series

    Features & Benefits

    • Heavy-duty housing design is reinforced for extended life and severe duty
    • Standard top-down lubrication and underwater adaptation
    • Built-in lubrication and air passages for easy installation of remote lubricators and air lines for underwater work
    • Slip-fit tool bushings are easy to replace when needed
  • Ranges / Models

    • Compact
      • 108 – 200 ft.lbs energy class – carrier range 1,800-4,000 lbs
      • 211 – 250 ft.lbs energy class – carrier range 2,600-5,700 lbs
      • 315 – 350 ft.lbs energy class – carrier range 3,500-7,900 lbs
      • 522 – 500 ft.lbs energy class – carrier range 5,500-12,100 lbs
    • Small
      • 155/E – 150 ft.lbs energy class – carrier range 1,800-4,000 lbs
      • 255/E – 200 ft.lbs energy class – carrier range 2,600-5,500 lbs
      • 355/E – 350 ft.lbs energy class – carrier range 3,500-7,900 lbs
      • 455/E – 450 ft.lbs energy class – carrier range 6,000-11,500 lbs
      • 555/E – 550 ft.lbs energy class – carrier range 7,100-17,600 lbs
      • 777/E – 750 ft.lbs energy class – carrier range 9,500-20,900 lbs
      • 999/E – 1,200 ft.lbs energy class – carrier range 12,800-28,700 lbs
    • Mid-Range
      • 1322E – 1,600 ft.lbs energy class – carrier range 19,800-33,100 lbs
      • 1655/E – 2,500 ft.lbs energy class – carrier range 26,500-44,100 lbs
      • 2166/E – 3,500 ft.lbs energy class – carrier range 35,300-57,300 lbs
    • Large
      • 2577/E – 5,000 ft.lbs energy class – carrier range 46,300-70,500 lbs
      • 3288/E – 8,000 ft.lbs energy class – carrier range 57,300-92,600 lbs
      • 4099/E – 11,000 ft.lbs energy class – carrier range 75,000-121,300 lbs
      • 5011/E – 13,000 ft.lbs energy class – carrier range 94,800-176,400 lbs
      • 9033 – 18,000 ft.lbs energy class – carrier range 149,900-264,600 lbs
  • Gomaco GT-3200 Sidewalk Paver

    Specifications

    • DIMENSIONS (Shipping)
      • Overall length: 28.5 ft. (8.69 m).
      • Overall length without conveyor: 24 ft. (7.32 m).
      • Overall height: 8.2 ft. (2.5 m)
      • Overall width without walkway: 6.7 ft. (2 m).
      • Overall width with walkway: 8.6 ft. (2.62 m).
  • Gomaco GT-3200 Slipform Paver

    Specifications

    • DIMENSIONS (Shipping)
      • Overall length: 20.1 ft. (6.13 m).
      • Overall length without trimmer: 17.5 ft. (5.33 m).
      • Overall height: 8.5 ft. (2.59 m) with trimmerhead.
      • Overall height without mold and trimmer: 8 ft. (2.44 m).
      • Overall width: 8.5 ft. (2.59 m).
    • WEIGHT (Approximate)
      • 15,000 lbs. (6804 kg). Weight can vary depending on size of mold and options.
  • Gomaco High Production Screed

    Key Features

    • GOMACO’s high-production, truss-mounted screed, for paving of bridge decks, flat slabs, and concrete floors.
    • The revolutionary high-production screed has an auger, finishing cylinder, and trailing screed in series to finish the concrete in one pass
    • The 5.7 foot (1.74 m) long auger can advance as much as four feet (1.22 m) in a single pass.
    • The C-450 and high-production screed can be controlled by a touchscreen on ground level. With the operator being at ground level, they can view exactly what the machine and high-production screed is producing so they can control how far to advance it or what changes need made during the paving process.
  • Sandvik QJ341 Mobile jaw crusher

    Key Specifications
    Equipment Single toggle C12 jaw crusher
    Feed Opening 1200 x 750 mm / 47″ x 29″
    Optimum Feed Size 650 mm / 25″ 6'
    Engine C9 / C9.3 Acert 261 kW / 350 hp
    D11 Volvo 265 kW / 355 hp
    Transport Length 14.05 m / 46' 1 ¼”
    Transport Width 2.86 m / 9' 4 ½”
    Transport Height 3.45 m / 11' 3 ⅝”
    Weight 45,233 kg / 99,722 lbs
  • Sandvik QJ341+ Mobile jaw crusher

    Key Specifications
    Equipment Single toggle C12 jaw crusher
    Feed Opening 1200 x 750 mm / 47″ x 29″
    Optimum Feed Size 650 mm / 25″ 6'
    Engine C9 / C9.3 Acert 261 kW / 350 hp
    D11 Volvo 265 kW / 355 hp
    Transport Length 14.72 m / 48' 3 ½”
    Transport Width 2.80 m / 9' 2″
    Transport Height 3.72 m / 12' 2 ¼”
    Weight 48,273 kg / 106,424 lbs
    Download Spec Sheet
  • Sandvik QH332 Mobile Cone Crusher

    Key Specifications
    Equipment Sandvik CH430 Hydrocone
    Maximum Feed Size 185mm / 7 ¼”
    Engine C9 / C9.3 Acert 261 kW / 350 hp
    Transport Length 14.56m / 47' 9 ¼”
    Transport Width 2.80m / 9' 2 ¼”
    Transport Height 3.40m / 11' 2 ¾”
    Weight 32,800 kg / 72,312 lbs
  • Sandvik QH441 Mobile Cone Crusher

    Key Specifications
    Equipment Sandvik CH440 Hydrocone
    Maximum Feed Size 215 mm / 8 ½”
    Engine C13 Acert 328 kW / 440 hp
    Transport Length 17.21m / 56' 5 ⅝”
    Transport Width 2.95m / 9' 8 ½”
    Transport Height 3.80m / 12' 5 ½”
    Weight 50,488 kg / 111,307 lbs
  • Sandvik QS331 Mobile secondary cone crusher

    Key Specifications
    Equipment Sandvik CS430 Hydrocone
    Maximum Feed Size 360mm / 14 ⅛”
    Engine C9 / C9.3 Acert 261 kW / 350 hp
    Transport Length 14.56m / 47′ 9 ¼”
    Transport Width 2.80m / 9′ 2 ¼”
    Transport Height 3.80m / 12′ 5 ½”
    Weight 36,000 kg / 76,366 lbs
    Download Spec Sheet
  • Sandvik QS441 Mobile secondary cone crusher

    Key Specifications
    Equipment Sandvik CS440 Hydrocone
    Maximum Feed Size 450mm / 17 ¾”
    Engine C13 Acert 328 kW / 440 hp
    Transport Length 17.47m / 57' 4″
    Transport Width 2.95m / 9' 8½”
    Transport Height 4.0m / 13' 1½”
    Weight 55,753 kg / 122,914 lbs
  • Sandvik QI341 Mobile impact crusher

    Key Specifications
    Equipment Sandvik CI411 Prisec™ Impactor
    Feed Opening 992 x 670 mm / 39″ x 26 ½”
    Maximum Feed Size 600 mm / 23 ⅝”
    Engine C9 / C9.3 Acert 261 kW / 350 hp
    Transport Length 14.08 m / 46' 2″
    Transport Width 2.50 m / 8' 2″
    Transport Height 3.40 m / 11' 2″
    Weight 37,200 kg / 82,012 lbs
    Weight (with HS option) 44,978 kg / 99,160 lbs
  • Sandvik QI441 Mobile impact crusher

    Key Specifications
    Equipment Sandvik CI421 Prisec™ Impactor
    Feed Opening 1360 x 800 mm / 54″ x 31 ½”
    Maximum Feed Size 800 mm / 31 ½”
    Engine C13 Acert 328 kW / 440 hp
    Transport Length 15.67 m / 51' 5″
    Transport Width 3.00 m / 9' 10″
    Transport Height 3.60 m / 11' 10″
    Weight 52,725 kg / 116,239 lbs
    Weight (with HS Double deck) 64,340 kg / 141,845 lbs
    Weight (with HS Single deck) 61,280 kg / 135,099 lbs
  • Sandvik UJ440i Mobile jaw crusher

    Key Specifications
    Equipment Sandvik CJ412 Jaw
    Feed Opening 1200 x 830 mm / 48″ x 32″
    Maximum Feed Size 760mm / 30″
    Engine D13 315 kW / 422 hp
    Transport Length 16.58 m / 54' 5″ (Classic)
    17.92m / 58' 10″ (Trend)
    Transport Width 3.00 m / 9' 10″
    Transport Height 3.92 m / 12' 10″
    Weight 62,500 kg / 137,790 lbs
  • Sandvik HD Apron feeder

    Model Feeder
    C-C length
    m
    Pan width
    m
    Chain size Weight
    kg
    HD1205 5 1.2 D4 14600
    HD1405 5 1.4 D4 16500
    HD1605 5 1.6 D6 19500
    HD1806 6 1.8 D6 24500
    HD2006 6 2.0 D8 30500
    HD2206 6 2.2 D8 32500
  • Page 1 of 61 2 3 6