Used Equipment

Showing all 5 results

  • Used 2001 Powerscreen Chieftain 1400 Wheeled Screener

    Used 2001 Powerscreen Chieftain 1400 Wheeled Screener
    Unit is wheeled, complete with Vibrating Grid option
    **Rebuilt by Aggregate Equipment**
    7500 hours
    Available on request
    FOB Truro NS

  • Used 2011 Powerscreen Chieftain 400 Wheeled Screener

    Used 2011 Powerscreen Chieftain 400 Wheeled Screener
    Unit is wheeled
    1230 hours
    Available on request
    As Is-Where Is
    FOB Truro NS

  • Used 2014 Atlas Copco FlexiRoc T40-5 Top Hammer Drill Rig

    Used 2014 Atlas Copco FlexiRoc T40-5 Top Hammer Drill Rig
    11,425 hours
    Available on request
    As Is-Where Is
    FOB Truro NS

  • Used 2010 Roadtec SB2500D Shuttle Buggy

    Used 2011 Roadtec SB2500D Shuttle Buggy – Material Transfer Vehicle
    Unit has 8515 hours
    Available on request
    As Is-Where Is
    FOB Truro NS

    ENGINE:
    CAT® C9-300 HP, Tier llI, 6-cylinder diesel engine, 300 HP (224 kw) @ 2,200 rpm. Engine instrumentation includes tach/hour meter, oil pressure, voltage and emergency shutdown system. Easy access to oil cooler/radiator.
    OPERATOR’S STATION:
    Operator positions on both sides. Control panel pivots for use from either station allowing for same-lane or adjacent-lane operation from either side. One-piece hydraulically-raisable hood allows easy access to engine, pumps and motors. Inside turning radius 26’6″ (8.1 m).
    GROUND DRIVE:
    All hydrostatic for continuously variable speed control with two speed ranges. Electric-over-hydraulic shift between working and transport ranges. Maximum speed (working range) 3.0 mph (4.8 kph). Maximum speed (travel range) 9 mph (14.5 kph).
    TIRES:
    Large, high-flotation – 21:00 x 25″ (53.3 m x 635 mm).
    ELECTRICAL SYSTEM:
    Standard system includes heavy-duty alternator, battery, and circuit breaker protection of all systems.

    FUME EXTRACTION SYSTEM:
    Two blowers. Fold-down 10″ (254 mm) exhaust pipes.
    SLAT CONVEYORS TRUCK UNLOADING (C-1):
    High-capacity truck unloading system with low deck height, 9’2″ (2.8 m) truck opening and 22″ (559 mm) o.d. x 8″ (203 mm) deep, 27% chrome-iron cast, segmented converging auger for quick material flow. Conveyor has weld-on flights 5/8″ (16 mm) thick, 5.5″ (140 mm) wide x 57″ (1,448 mm) long. Ni-Hard liner plates are removable. Power dump front hopper has a vibrator on the bottom that helps keep material moving. Adjustable push roller is standard. Conveyor capacity
    is rated at 1,000 TPH (907 MTPH).
    SURGE BIN (C-2):
    Unloads the surge bin with a multi-pitch 22″ (559 mm) o.d. x 8″ (203 mm) deep, 27% chrome-iron cast, segmented anti-segregation auger in the hopper.  Conveyor system has weld-on flights 5/8″ (16 mm) thick, 7″ (178 mm) wide x dual 16″ (406 mm) long. Liner plates are Ni-Hard and removable. Conveyor capacity is 600 TPH (544 MTPH).
    PAVER LOADING (C-3):
    Conveyor swings 55 degrees to either side of center. Maximum conveyor discharge height is 12′ 6″ (3.8 m) from ground level. Conveyor flights welded to the chain are 1/2″ (12.7 mm) thick, 3″ (76.2 mm) wide and 30″ (762 mm) long. Conveyor has bolted 1/2″ (12.7 mm) 500 Brinell replaceable floor plates. C-2 and C-3 conveyors have on/off controls that are interlocked. Conveyor capacity is 600 TPH (544 MTPH).

    CAPACITIES:
    Fuel tank…………………………………….140 gal (529 L)
    Hopper……………………………………25 tons (22.7 MT)
    material………………..120 lbs/cu ft (1,922 kg/cu m)

  • Used 1997 Elrus 6202 Feeder Screener

    Used 1997 Elrus 6202 Feeder Screener
    Unit is electric
    Available on request
    As Is-Where Is
    FOB Truro NS

    Features:
    Chassis
    – 21″ WF drop centre main frame
    – Tandem axle walking beam suspension
    – Eight 11R x 22.5 tires and bud wheels
    Screen Box
    – 6×20 S deck screen 332 series
    – 2×30 hp motors
    – 18″ drive sheave
    – 10 degree incline
    – walkways and ladders both sides
    42″ Overhead Conveyor
    – 20 hp motor
    48″ Front Delivery Conveyor
    – fixed height with 7′ discharge
    – 20 hp motor
    (2) 30″ Cross Conveyors
    – 10 hp motors

    Notes:
    – All electrical 575 v.
    – Control panel shown in pics is not in working order.
    – Current specifications may differ from what is listed above (list based on factory build sheet).