Trade-Ins

Showing all 2 results

  • Used 2010 Roadtec SB2500D Shuttle Buggy

    Used 2010 Roadtec SB2500D Shuttle Buggy – Material Transfer Vehicle
    Unit has 8515 hours
    Available on request
    As Is-Where Is (Buggy was completely gone over and fully serviced in winter 2019-2020)
    FOB Truro NS

    ENGINE:
    CAT® C9-300 HP, Tier llI, 6-cylinder diesel engine, 300 HP (224 kw) @ 2,200 rpm. Engine instrumentation includes tach/hour meter, oil pressure, voltage and emergency shutdown system. Easy access to oil cooler/radiator.
    OPERATOR’S STATION:
    Operator positions on both sides. Control panel pivots for use from either station allowing for same-lane or adjacent-lane operation from either side. One-piece hydraulically-raisable hood allows easy access to engine, pumps and motors. Inside turning radius 26’6″ (8.1 m).
    GROUND DRIVE:
    All hydrostatic for continuously variable speed control with two speed ranges. Electric-over-hydraulic shift between working and transport ranges. Maximum speed (working range) 3.0 mph (4.8 kph). Maximum speed (travel range) 9 mph (14.5 kph).
    TIRES:
    Large, high-flotation – 21:00 x 25″ (53.3 m x 635 mm).
    ELECTRICAL SYSTEM:
    Standard system includes heavy-duty alternator, battery, and circuit breaker protection of all systems.

    FUME EXTRACTION SYSTEM:
    Two blowers. Fold-down 10″ (254 mm) exhaust pipes.
    SLAT CONVEYORS TRUCK UNLOADING (C-1):
    High-capacity truck unloading system with low deck height, 9’2″ (2.8 m) truck opening and 22″ (559 mm) o.d. x 8″ (203 mm) deep, 27% chrome-iron cast, segmented converging auger for quick material flow. Conveyor has weld-on flights 5/8″ (16 mm) thick, 5.5″ (140 mm) wide x 57″ (1,448 mm) long. Ni-Hard liner plates are removable. Power dump front hopper has a vibrator on the bottom that helps keep material moving. Adjustable push roller is standard. Conveyor capacity
    is rated at 1,000 TPH (907 MTPH).
    SURGE BIN (C-2):
    Unloads the surge bin with a multi-pitch 22″ (559 mm) o.d. x 8″ (203 mm) deep, 27% chrome-iron cast, segmented anti-segregation auger in the hopper.  Conveyor system has weld-on flights 5/8″ (16 mm) thick, 7″ (178 mm) wide x dual 16″ (406 mm) long. Liner plates are Ni-Hard and removable. Conveyor capacity is 600 TPH (544 MTPH).
    PAVER LOADING (C-3):
    Conveyor swings 55 degrees to either side of center. Maximum conveyor discharge height is 12′ 6″ (3.8 m) from ground level. Conveyor flights welded to the chain are 1/2″ (12.7 mm) thick, 3″ (76.2 mm) wide and 30″ (762 mm) long. Conveyor has bolted 1/2″ (12.7 mm) 500 Brinell replaceable floor plates. C-2 and C-3 conveyors have on/off controls that are interlocked. Conveyor capacity is 600 TPH (544 MTPH).

    CAPACITIES:
    Fuel tank…………………………………….140 gal (529 L)
    Hopper……………………………………25 tons (22.7 MT)
    material………………..120 lbs/cu ft (1,922 kg/cu m)

  • Used 1997 Elrus 6202 Feeder Screener

    Used 1997 Elrus 6202 Feeder Screener
    Fully rebuilt by Aggregate Equipment
    Includes NEW Elrus 6202 Inclined Screen Box
    Unit is electric
    Available on request
    As Is-Where Is
    FOB Truro NS
    New Elrus Screenbox comes with Elrus product warranty
    (warranty on screenbox only, not other items)

    Features:
    Chassis
    – 21″ WF drop centre main frame
    – Tandem axle walking beam suspension
    – Eight 11R x 22.5 tires and bud wheels
    NEW Elrus Screen Box
    – 6×20 S deck screen 332 series
    – 2×30 hp motors
    – 18″ drive sheave
    – 10 degree incline
    – walkways and ladders both sides
    – Elrus product warranty (new screen box only)
    42″ Overhead Conveyor
    – 20 hp motor
    48″ Front Delivery Conveyor
    – fixed height with 7′ discharge
    – 20 hp motor
    (2) 30″ Cross Conveyors
    – 10 hp motors

    Notes:
    – All electrical 575 v.
    – Current specifications may differ from what is listed above (list based on factory build sheet).