6m (20')
Screen Size:
1.8m (6')
Engine Size:




• Incorporates screenbox, chute, walkway and support structure
• Designed for maximum production efficiency in applications including sand and gravel, coal, crushed stone, slag, recycle materials, concrete, iron ore and silica glass
• All boxes are huck bolted to eliminate stress areas created by welding
• The static structure which carries the screen unit is robost, easy to assemble and includes integrated material discharge chutes
• Walkways, access steps and rolling chute system allow easy access to view production and carry out maintenance

20 x 6 Screenbox

Screenbox Size
Electric motor
Water feed pipe
Top deck spray bars
Middle deck spray bars
Bottom deck spraybars
Waste water discharge
Product discharge height

3 Deck               2 Deck
(2 Bearing)        (4 Bearing) 

4.71m (15’ 6”)   4.71m (15’ 6”)
15.3m (50’ 2”)   15.3m (50’ 2”)
7.8m (25’ 3”)     7.36m (24’ 2”)
30hp 22kW       30hp 22kW
150mm (6”)      150mm (6”)
10 off                10 off
8 off                  N/A
8 off                  8 off
2.34m (7’ 6”)    2.34m (7’ 6”)
1.63m (5’ 4”)    1.63m (5’ 4”)


Features & Benefits

• Side tensioned screen box
• Spray bars spread evenly on all decks
• Plastic fan tail spray nozzles
• Galvanized walkway & handrails
• Rolling chute system
• Manual screen angle adjustment
• Electric drive
• Steps and walkways provide easy access for maintenance
• Steps can be placed at any corner of the structure
• Rolling chute allows greater access to screen mesh when changing
• Robust easy to assemble steel support structure
• Rubber lined wear parts
• Complies with all relevant essential health and safety requirements
• High pressure plastic fan tail nozzles deliver clean end product
• Huck bolted, four bearing, free floating vibrating system eliminates the need for fine tuning
• High capacity (depending on mesh size and material type)
• Low maintenance

• 3 deck variant
• Dry, rinser & part rinser
• Level frame
• Modular polyurethane decks
• Rubber side tensioned mesh
• Aluback wear plate in wash box
• 10” Sand slurry pipes
• Rubber lined catch box and division plates
• Rubber lined transfer box
• Adjustable division plates
• Hydraulic drive (on certain models)
• Brass or plastic nozzles
• Height extensions to feed from the PS and FM ranges
• Flipper plates in the rolling chute. Permitting blending of material grades