- Set back axle allows conveyor to stockpile at 22° incline (standard is 18°) for higher stockpile needs.
- Patented FD Axle allows quickest, safest transition from road to stockpile mode.
- Fully enclosed power travel gearing offers protection from dust and fugitive material.
- Patented power fold protects hydraulic cylinder rods from damaging debris during operation.
20 In stock
Description
| Conveyor Length | 80′ | 100′ | 125′ |
| Conveyor Ground Length | 72′ – 3″ | 91′ – 0″ | 116′ – 4″ |
| Raised Height to Center of Pulley | 32′ – 5″ | 39′ – 4″ | 50′ – 8″ |
| Lowered Height to Center of Pulley | 18′ – 1″ | 20′ – 1″ | 18′ – 2″ |
| Anchor Pivot to Center of Axle | 32′ – 2″ | 39′ – 8″ | 46′ – 5″ |
| Stockpile Height | 31′ – 7″ | 38′ – 8″ | 49′ – 8″ |
| Radius of Pile | 42′ – 2″ | 51′ – 7″ | 66′ – 5″ |
| Anchor Pivot to Center of Pile | 74′ – 6″ | 93′ – 0″ | 114′ – 7″ |
| Travel Length | 53′ – 7″ | 68′ – 8″ | 84′ – 2″ |
| Travel Height | 13′ – 5″ | 13′ – 2″ | 13′ – 11″ |
| Tail to Kingpin | 5′ – 1″ | 5′ – 0″ | 5′ – 6″ |
| Kingpin to Axle | 34′ – 7″ | 39′ – 7″ | 49′ – 4″ |
| Axle to Head | 19′ – 0″ | 29′ – 1″ | 34′ – 10″ |
| Weight at Axle- 36″ Belt Width (lbs) | 20,000 | 37,250 | 39,500 |
Maximum Stockpile Capacities (Manual Piles)
Assumptions based on aggregate which has a 37° angle of repose and 100 PCF material density.
| Conveyor Length (ft) | 80′ | 100′ | 125′ |
| Cubic Yards (Conical) | 2,500 | 4,500 | 8,500 |
| Cubic Yards (90°) | 8,600 | 16,300 | 31,000 |
| Cubic Yards (180°) | 14,900 | 28,000 | 52,900 |
| Cubic Yards (270°) | 21,100 | 39,700 | 75,000 |
| Tons based on 100 PCF (Conical) | 3,300 | 6,100 | 11,400 |
| Tons based on 100 PCF (90°) | 11,700 | 21,900 | 41,400 |
| Tons based on 100 PCF (180°) | 20,100 | 37,700 | 71,400 |
| Tons based on 100 PCF (270°) | 28,500 | 53,600 | 101,400 |
