| Time of Operation |
Class II (1.5 SF or 16 hour shift) |
| Environment |
Coastal |
| Finish |
Galvanized or Epoxy |
| Operating Tonnage |
500-5,000 TPH |
| Belt Width |
36″ – 72″ |
| Belt Thickness |
3/4″ MOR Grain or Wood Chip |
| Primary Belt Scraper |
Mine Duty Belt Scraper |
| Secondary Belt Scraper |
Mine Duty Belt Scraper |
| Pulleys |
Mine Duty 2.0 |
| Pulley Lagging |
1/2″ HBR |
| Motor |
Severe Duty |
| Gearing |
Right Angle/Direct Coupled |
| Bearings |
SAF Pillow Block |
| Take-ups |
Heavy Duty Take-up |
| Idlers |
6″ CEMA C, D and E |
| Skirting/Load Area |
5′ – 10′ with Sealing System |
| Remote Greasing |
Recommended |
| Movement Horn |
Available |
| Zero Speed Switch |
Recommended |
| Mis-Alignment Switch |
Recommended |
| E-Stop and Cable |
Recommended |
| Rip Detection Switch |
Recommended |
| Area Lighting |
Available |
| Tracks |
Available |
| Portability |
FD Axle, Pit Portable Axle, Fixed Radial Axle |
| Guarding/Handrails |
Painted Safety Yellow |
| Discharge Hoods |
Recommended, Telescoping Chutes Available |
| Hood and Skirting Liners |
3/8″ AR 400 |
| Belt and Wind Covers |
Recommended for Dust |
