Accuracy 0 +/-1% or better
Protected enclosed load cell Yes
One cable from scale to monitor Yes
One monitor works with 4 belt scales Yes
  • Wireless monitor available for faster setup
  • Angle compensator available for telestacker
  • Easy to install and calibrate
  • Self-calibration weight included
Category:

Product Description

SciTronics detectors are designed to find tramp while scanning products such as highly mineralized or magnetic ores (including magnetite and pyrites) even when conveyed on steel cable belts, as well as copper, nickel, aluminum, aggregates, coal, rubber, wood chips, sinter and tar sands. They can also be used in recycling plants to detect tramp among plastic, glass or paper.

The electrical conductivity of materials conveyed through the SciTronics sensor area is measured by detecting variations in a pulsed electronic field. Since magnetic and conductive properties of any material are independent, both magnetic and non-magnetic metals are detected.

CONTACT US TO SEE HOW IT PAYS TO INSTALL THE RIGHT METAL DETECTOR, THE FIRST TIME!

  • Detects both ferrous and non-ferrous tramp
  • Immune to temperature and humidity effects
  • Sensitivity threshold to detect tramp on metallic splices
  • Can detect tramp from 1’’ x 1’’ x 1’’ depending
    on application
  • Conveyor velocity from 6 ft./min. to 1200 ft./min
  • Splice detector available
  • Mono or dual coil available
  • Canadian national dealer network for local support

WIRELESS MONITOR

Excellent feature for a portable plant or when a long distance separates the conveyor and monitor. The kit includes a wireless transmitter at the scale carriage and a wireless receiver at the monitor. Working distance is 1000 feet line of sight. Extra transmitters available for other scales!

AUTOMATIC ANGLE COMPENSATOR

The SciTronics scale can be equipped with an angle calibration compensator for a conveyor working in different angles. There is no need to recalibrate your scale when you raise or lower your conveyor.

1 – SCITRONICS MONITOR WITH BUILT-IN PRINTER

(at purchase only)

2 – SCITRONICS EXTERNAL PRINTER

3 – BELT SCALE, 3 PAIRS OF SHIELDED CABLES

(sold per foot)

4 – RD 1000 EXTERNAL REMOTE DISPLAY

5 – SCITRONICS MONITOR’S PROTECTIVE
ENCLOSURE WITH DOOR LOCK

(Size: 16”x16”x6”) 1/2 wire holder for control box


OTHER PRODUCTS

4-20 MA

PULSE/RELAY CARD

RS 232/485 CARD

RS 232/485 CARD

The RC 1000 Feed rate controller provides constant rate control of material feed at a specific set point. Typically used in conjunction with weigh-belt feeders or other conveyors for blending of various materials.

LC 1000

The LC 1000 load controller is ideal for truck and rail loading, as well as batching one more ingredient into a bulk material process. Operate in conjunction with the belt scale or weigh-belt feeder. Store up to 15 truck ID numbers with 15 different load sizes. Must be used with DSP 1000.