Features
- Extra Large Drive Motors for Years of Service!
- Designed with Service & Maintenance in Mind!
- Clean, Simple, Basic Design!
- 0-6’ Standard Paving Width + Optional Screed Extensions up to 7’ Wide!
- Tracks are fixed at 38” to accommodate screed style.
- Hydraulic End-Gates move in & out, and have rulers on the top of the end gate to see where they are.
- Extra Large Cut Off Door with two (2) Cylinders & Flow Regulators that open the door evenly & smoothly.
- Hydraulic Tilt Hopper. Hopper easily bolts together. Raise the complete hopper for ease of maintenance.
- All controls are on the rear of the machine, including the Key Switch & Throttle.
- Two (2) 9” Cast Augers are independently operated both Forward & Reverse.
Description
SPECIFICATIONS
- ENGINE: 14HP Hatz diesel, Model 1D81Z-9221, electric start mounted on 1/2” thick steel plate motor mount.
- PUMP: Dual hydrostatic, variable speed. Each section has a displacement of .97 cu. in.
- DRIVE MOTORS: Two (2) drive motors for tracks – 28.7 Cu.In. Displacement. Two (2) drive motors for augers – 24 cu. in. displacement.
- HOSES: SAE JIC hose ends & fittings. 3,000 P.S.I., working, 12,000 P.S.I., burst.
- BATTERY: 12 volt, automotive type, 850 CCA.
- FUEL TANK: Steel, 8.9 gallon capacity.
- HYDAULIC TANK: Steel, 8 gallon capacity
- HOPPER: Dual hopper, 1/4” thick, steel plate. Inside hopper tilts to 52° angle for ease of dumpIng material. 1.85 sq. yd. capacity.
- SCREED: 40” wide, with crown/invert adjustment, power end gates and end gate adjustment plates for uniform texture.
- AUGER ASSEMBLIES: Two (2) 9” cast augers, with independent hydraulic drive, forward and reverse.
- DRIVE: Hydrostatic; variable forward and reverse.
- TRACK ASSEMBLIES: Heavy duty Bridgestone tracks. Tracks are fixed at 38” to accommodate screed style.
- CONTROLS: All controls are located at the rear of the machine over the screed, for ease of operation.
- MAIN FRAME: One (1) piece, 1/4” thick steel main frame. 2” x 2” square tubing supports.
- WELDS: Continuous welds where needed for durability.
- GUSSETS: 1/4” gussets where needed for strength.
- BEARINGS: Cast iron, heavy duty, greaseable.
- CHAINS & SPROCKETS: #80 chain and sprockets.
- PAVING SPEED: 0 – 50’ +, per minute.
- PAVING WIDTH: 24” to 72”.
- PAVING THICKNESS: 1/4” – 5”.
- OPTIONS: 6” Screed Extensions; Hopper Panel Extensions; Cut-Off Plates.
- GUARDS/DECALS: All moving parts guarded. Full set of safety decals.
- PAINT: Powder coat baked enamel polyester finish; resists ultraviolet light. Safety yellow.
- DIMENSIONS: Length: 9’ 4” (with step up), Width: 3’8”, Height: 3’ 11” (from the ground to the top of hopper). Weight: 4,400 lbs. (Approximately)
- WARRANTY: 1-year standard warranty
